Air Pressure Matters

Your motorcycle rides on two patches of rubber about the size of your palm. Tire pressure decides how big those patches are, and how well they grip, steer and stop.

Proper Inflation

✓ Just right FOOTPRINT

The tire holds the shape it was designed for, with a contact patch that's the right size.

  • Predictable grip and braking
  • Light, neutral steering
  • Even wear and the longest tire life

Under-Inflated

✗ Too low FOOTPRINT

The sidewalls flex and squat, and the contact patch spreads too wide.

  • Heavy, slow steering that fights you in turns
  • Heat builds up inside the tire, raising blowout risk
  • Shoulder wear and cupping

Over-Inflated

✗ Too high FOOTPRINT

The tire can't flatten against the road, so the patch shrinks to a narrow strip.

  • Less grip, especially leaned over or on rough pavement
  • Harsh, skittish ride
  • Fast wear down the center

Checking Your Pressure

  • Check it cold. Read the pressure before you ride, not after the tires have warmed up.
  • Use your bike's spec. Go by your owner's manual or the sticker on the swingarm or frame, not the max pressure on the sidewall.
  • Check often. Check weekly and before every long ride. Motorcycle tires lose air faster than car tires.
  • Adjust for load. Many manufacturers list a higher pressure for riding with a passenger or luggage.

Arizona heat: pressure rises as tires heat up on hot pavement. Set your pressure cold in the morning and don't let air out to "correct" a hot reading.

Tire Tech FAQ

How do I read my tire size?
Most modern street tires use metric sizing, like 180/55ZR17. 180 is the tread width in millimeters. 55 is the aspect ratio: sidewall height as a percentage of width. Z/R means a speed-rated radial. 17 is the rim diameter in inches. You'll also see a load index and speed rating, such as 73W. Replacements should match or exceed both. You may also run into older inch sizes (MT90-16) and alpha sizes (MU85B16) on cruisers. If you're unsure, give us a call with your year, make and model.
When should I replace my tires?
Replace a tire when the tread reaches the wear indicator bars molded into the grooves, or sooner if you see cracking, cuts, bulges, cupping or exposed cords. A tire squared off in the center from highway miles also handles worse in corners and is worth replacing even with tread left.
How old is too old?
Rubber ages even when the bike sits. The DOT code on the sidewall ends in a four-digit date. 2423 means week 24 of 2023. Guidance varies by manufacturer, but tires more than about five years old should be inspected closely, and older tires are often due for replacement regardless of tread. The Arizona sun and heat speed this up.
Do I need to replace both tires at the same time?
Not always. Rear tires usually wear faster than fronts. Running a matched front and rear (same brand and model) gives the most predictable handling, so if your front is close to worn when the rear is done, doing both is often worth it. We'll look at both and tell you honestly.
Anything special about brand-new tires?
Yes. New tires have a slick surface from the manufacturing process and need some easy miles to scrub in. For roughly the first 100 miles, avoid hard braking, aggressive acceleration and big lean angles, and gradually work toward the edges of the tread. Take extra care when tires are cold or the road is wet.
Can a punctured motorcycle tire be repaired?
Sometimes. It depends on where the puncture is, how big it is, and the tire manufacturer's guidelines. Sidewall damage is not repairable. Bring it in and we'll inspect it. If you added Triple Crown road hazard protection when you bought the tire (see our Warranty page), a repair or replacement may be covered.